Laser scanner based on Hesai XT32M2X, 200 m working range, 120 m working flight altitude, triple return mode up to 1,920,000 points per second, 3-5 cm XYZ accuracy, 360° FOV, built-in 200 Hz IMU with 0.07/0.01 accuracy, built-in GNSS receiver, weight 720 g.

• The most compact 360° LiDAR on the market.
• The lightest LiDAR of the product line – 720 g.
• The highest working flight altitude – 200 m.
• Triple return mode, the others have dual return.
• Highest scanning frequency – 1 920 000 PPS.

Features

• Affordability. We work hard to provide the lowest prices for LiDARs in its class.
• Performance. Covers over 2 sq. km. of territory in one flight from a 120 m altitude.
• Accuracy. Very precise and thin point cloud due to modern laser sensor, built-in high precision IMU and integrated GNSS receiver.
• Mobility. LiDAR 3 in 1: can be mounted not only on the drone, but also on a car and a surveying backpack.
• Autonomy. Completely autonomous LiDAR missions when mounted on the DJI Matrice 350 RTK.
• Software. Provides full processing cycle from trajectory calculation to point cloud generation with the required coordinate system, strip adjustment and SLAM algorithms for data processing in conditions of insufficient GNSS signal are supported.
• Integration. The laser scanner can work on any drone, is fully compatible with TOPODRONE P24 and P61 photogrammetric cameras, the camera can be connected to the laser scanner, a fixed installation on LiDAR, as well as an option with installation of the camera on a 3-axis gimbal.

In the box

• 1 * TOPODRONE LiDAR 200+
• 1 * Drone mount
• 1 * Antenna cable
• 1 * GNSS antenna
• 1 * Flash card
• 1 * Cable kit
• 1 * Carrying case

Pelajari Lebih Lanjut Tentang Topodrone LIDAR 200+