Description

Designed to work with the DJI Inspire 3, the DJI TB51 Intelligent Flight Battery has a 4280mAh capacity for up to 28 minutes of flight per charge. With support for extreme temperatures from -4 to 104°F, the TB51 can keep your Inspire 3 flying during demanding productions. In order to provide adequate power in temperatures below

The TB51 Intelligent Battery is equipped with high-energy battery cells and uses an advanced battery management system to power the aircraft. Only use a DJI-approved charging device to charge the Intelligent Battery. The firmware for the Intelligent Battery is included in the aircraft firmware. Make sure the firmware of all intelligent batteries is updated to the latest version

The TB51 Intelligent Battery is equipped with high-performance, high-energy battery cells to provide robust power, and it uses an advanced battery management system. It also optimizes low-temperature performance of the cell with a built-in auto-heating system (this function can be enabled automatically by the aircraft or manually in the app).

Key Features

• For DJI Inspire 3
• 4280mAh Capacity
• Up to 28 Minutes of Flight Time
• Built-In Auto-Heating
• -4 to 50°F Operating Temperature

Battery Features

The Intelligent Battery has the following features:

1. Battery Level Display: the battery level LEDs display the current battery level.
2. Battery Self-discharge: will be triggered if the battery level is higher than 60%. Discharging the battery level to 60% can extend battery life.
3. Battery Cell Balanced: the voltage of the battery cells are automatically balanced to avoid overcharge of over-discharge.
4. Overcharge Protection: the battery stops charging automatically once fully charged.
5. Temperature Detection: prevents any damage, the battery only charges when the temperature is between -20° to 45° C (-4° to 113° F).
6. Overcurrent Protection: the battery stops charging if an excess current is detected.
7. Over-Discharge Protection: ensures flight safety and allow users to have as much time as possible to deal with emergencies, over-discharge protection is disabled to allow continuous output. Pay attention to the remaining battery level during flight and land or Return to Home immediately when prompted to do so in the app. Otherwise, the battery may be dangerously over-discharged. Charging an over-discharged battery may be a fire hazard. To prevent this, the battery will be locked and can no longer be charged or used. When the battery is not used in flight, over-discharge protection will be enabled once the battery level is lower than 5% to avoid battery damage.
8. Short Circuit Protection: the power supply is automatically cut off if a short circuit is detected.
9. Battery Cell Damage Protection: the app will display a warning prompt when a damaged battery cell is detected.
10. Hibernation Mode: the battery will be in Hibernation mode when not in use to save power. The battery will enter Deep Hibernation mode once the power is too low. At this time, the battery LEDs will not function after pressing the battery level button. Insert the battery into
    the charging hub to charge for activation.
11. Communication: information about the voltage, capacity, and current of the battery is transmitted to the aircraft.
12. Warming up: ensures the battery operates normally at a low temperature. Refer to the Warming the Battery section for more information

In the Box

DJI TB51 Intelligent Flight Battery

Tips

Recommended to purchase in pairs.

In The Box

• TB51 Intelligent Battery × 1
• TB51 Intelligent Battery Paired Batteries Sticker × 1